1、 本 科 毕 业 设 计本 科 毕 业 设 计 (20152015 届)届) 题题 目目 长隧道定时通风控制系统的设计与实现 学学 院院 电子信息学院 专专 业业 电子科学与技术 班班 级级 学学 号号 学生姓名学生姓名 指导教师指导教师 完成日期完成日期 2015 年 5 月 摘 要 随着科学技术水平的不断提高,现在的汽车数量飞速增长。为了方便同行, 政府建造了长隧道方便通车,因为隧道比较密闭,空间狭小,随之而来的就是要 解决隧道通风排污的问题, 所谓隧道的通风, 也就是要排除汽车尾气和汽油蒸汽, 送入新鲜空气。以便有害物的含量稀释到国家规定的卫生标准要求。 本毕业设计主要设计一种能定时的通
2、风系统, 该系统主要包括定时通风与一 氧化碳采集两个基本功能。通过单片机对继电器的控制,完成对风扇的控制实现 通风功能,同时对一氧化碳采集器对空气中一氧化碳的测量与预设值的比较,从 而实现对单片机的控制。 关键字:轴流风机;STC89C51;mq-5 传感器。 Abstract . As science and technology continues to improve, the current rapid growth in the number of cars. In order to facilitate peer, the Government built a long tunne
3、l to facilitate the opening of the tunnel because relatively confined space is small, the attendant is to solve the problem of sewage tunnel ventilation,. The ventilation of the garage, which is to exclude the automobile exhaust and gasoline vapors, into the fresh air. The content of harmful substan
4、ces diluted to state health standards require This graduation project to design a ventilation system timing, The system mainly consists of two basic functions of timing ventilation and carbon monoxide acquisition。Fan control ventilation function microcontroller control relay to complete the acquisit
5、ion of carbon monoxide on the measurement of carbon monoxide in air at the same time with the default values for comparison, in order to achieve control of the microcontroller. Keyword:Intelligent ventilation system ;STC89S51;mq-5 Sensor. 目 录 1、引 言. 1 2、概 述. 2 2.1.长隧道定时通风系统介绍 3 2.2.单片机选择 4 2.3 本方案设计
6、思路 6 2.4 研发方向和技术关键 7 3、总体设计. 8 4、硬件部分. 9 硬件总图 9 4.1 单片机介绍 9 4.2 液晶 LCD1602 显示模块 . 13 4.3 传感器 . 14 4.4.A/D 转化电路模块 . 18 4.5 风扇控制电路 . 19 5、软件设计 21 5.1 软件流程图 . 21 5.2 模块说明 . 错误错误! !未定义书签。未定义书签。 6、制作与调试 22 6.1 硬件的布线与焊接 . 22 6.2 焊接 . 22 6.3 调试 . 22 6.4 实物图 . 23 7、结论 24 致谢. 25 参考文献. 26 附录. 27 1 1 引 言 近年来,随着中国科学技术的不断发展,导致机动车数量高速增长,车辆通 行问题变成了城市交通的一大困难。这就需要政府工程更注重车辆道路发展,所 以就开山辟石,大量长隧道建造起来了。长隧道是可以很方便车辆通行,大大减 轻了城市交通拥堵的压力,但另一方面,它的通风问题也是一大麻烦。 因为隧道是一个相对密闭的空间,所以通风换气的处理显得非常重要, 2003