1、 xx 集团制革废水氧化沟工艺治理的设计集团制革废水氧化沟工艺治理的设计 摘 要 本文应用氧化沟技术对xx集团皮革废水治理工艺进行初步设计和计算。氧化沟 生物处理工艺在制革废水处理中的应用是成功的，它最突出的优点是处理效果好， 在本工程设计中，氧化沟进水COD平均浓度在1700mg/l时，可确保处理后COD降至 150mg/l左右， COD、 硫化物、 动植物油、 色度等的去除率可分别达到92.12%， 98.17%， 99.10%和85.15%。它的另一特点是采用高效表面机械曝气机，可以在不中断运行的 情况下，在平台上维修机械设备，便于维护管理。 关键词：关键词：氧化沟；处理工艺；皮革污水处
2、理；设计参数 ABSTRACT Haining has been already among the top 100 countries because of its leather market and wool spinning industry. However, environmental problems have brought great pressure to a lot of Haining leather enterprises. Nowadays, Haining People pay much more attention to the environmental co
3、ncept and the extensive economy has disappeared. Meanwhile, the original wastewater control system has never met the need of the enterprises. This thesis was dedicated to the Fubangs effort to use oxidation ditch to deal with the wastewater. The thesis will also focus on the wastewater control syste
4、m. Oxidation ditch process in the biological treatment of tannery wastewater treatment was successful. The most prominent advantage of it to deal with the effect of good design in this project, the oxidation ditch average concentration of COD in the influent 1700mg / l, the COD can be treated to ens
5、ure that the 150mg / l to about, COD, sulfide, animal and vegetable oils, color the degree of the removal rate of 92.12%, respectively, 98.17%, 99.10% and 85.15%. Another characteristic is its use of high-performance surface mechanical aerators cannot be interrupted in the case of running in the pla
6、tform maintenance machinery and equipment, easy maintenance and management. Key Words: oxidation ditch; treatment process; leather wastewater control; design parameter I 目目 录录 1前言 1 2基本资料 3 2.1 设计水量、废水来源与水质 . 3 2.2 处理要求 . 3 2.3 气象与水文资料 . 3 2.4 厂区地形 . 3 3设计原则和执行标准 4 3.1 设计原则 . 4 3.2 执行规范和标准 . 4 4处理工艺流程的确定 5 5设计说明书 7 5.1 中格栅 7 5.2 细格栅 . 9 5.3 预沉池 . 10 5.4 气浮池 . 13 5.5 氧化沟 . 15 5.6 二沉池 . 16 5.7 浓缩池 . 18 6主要建筑物与设备 20 6.1 主要建筑物和主要设备 . 20 6.2 主要设备 . 20 7污水管道尺寸的确定 20 8高程计算 21 8.1 水头损失计算 . 21
