1、 本科毕业论文（设计）外文翻译本科毕业论文（设计）外文翻译 学生姓名学生姓名： 分分院（系） ：院（系） ： 信息工程学院 专业班级专业班级： 指导教师指导教师： 完成日期完成日期： Single-chip Author: Kenneth Ayala Start and stop page 7-22 Reference :The 8051 Microcontroller Publication date: 2004-06-01 Publishing House: Delmar Cengage Learning SCM is also known as micro-controller (Mic
2、rocontroller Unit), commonly used letters of the acronym MCU that it was first used in industrial control.Only a single chip by the CPU chip developed from a dedicated processor. The first design is by a large number of peripherals and CPU on a chip in the computer system, smaller, more easily integ
3、rated into a complex and demanding on the volume control device which. INTELsZ80 is the first designed in accordance with this idea processor, then on the development of microcontroller and dedicated processors have parted ways. Are 8-bit microcontroller early or 4-bits. One of the most successful i
4、s the INTEL 8031, for a simple, reliable and good performance was a lot of praise. Then developed in 8031 out of MCS51 MCU Systems. SCM systems based on this system until now is still widely used. With the increased requirements of industrial control field, began a 16-bit microcontroller, because th
5、e cost is not satisfactory but have not been very widely used. After 90 years with the great development of consumer electronics, microcontroller technology has been a huge increase. With INTEL i960 series, especially the later series of widely used ARM, 32-bit microcontroller quickly replace high-e
6、nd 16-bit MCU status and enter the mainstream market. The traditional 8-bit microcontroller performance have been the rapid increase capacity increase compared to 80 the number of times. Currently, high-end 32-bit microcontroller clocked over 300MHz, the performance catching the mid-90s dedicated processor, while the average model prices fall to one U.S. dollars, the most high-end 1 model only 10 dollars.Modern SCM systems
