1、摘 要 I .立交桥 .设计 摘 要 连续梁桥是工程上广泛使用的一种桥型 ,它不但具有可靠的强度 ,刚度及抗裂性 ,而且具有行车舒适平稳 ,养护工作量小 ,设计及施工经验成熟的特点。设计一座梁桥必须从桥跨布设 ,尺寸拟定 ,钢束布置以及施工方法等方面综合考虑 ,还要充分考虑设计参数和环境影响。 本设计是一联五跨连续梁桥，截面形式为单箱双室，纵向变截面；施工方式是满堂支架整体现浇。 该设计首先进行恒载、活载及次内力的计算 ,在此基础上进行荷载组合 ,绘制弯 矩和剪力包络图； 其次 ,根据短期效应组合配置预应力钢筋 ， 并进行预应力 损失 的计算；最后 ， 对该连续梁桥进行验算 ， 是否满足设计要
2、求 。 关键词 ：设计 连续梁桥 满堂支架 预应力 南京工业大学本科生毕业设计 (论文 ) II Design for Bridge Abstract The continuous beam bridge is a kind of bridge type used widely on the project. It not only has a reliable strength, stiffness and cracking, but also has a smooth journey comfortable, conservation work on the design and cons
3、truction experience of the characteristics of maturity. Design a bridge must be laid across from the bridge-laying, the size of the development, steel beam layout and construction methods, but also give full consideration to the design parameters and environmental impact. This is a design for a five
4、-span continuous bridge, whose cross-section is two-compartment, and changing on the road direction, constructed by pouring on-site on full framing. The first design includes constant load, the live load and the calculation of the internal forces. On the basis of a load combination, we can draw mome
5、nt and shear envelope map. Next, according to the short-term effect combination disposition prestressed reinforcement, and carries on the loss of prestress the computation. Finally, carries on the checking calculation to this continuous bridge, whether to satisfy the design requirements. Key Words: design； continuous bridge； full framing； prestress
