1、PDF外文：http:/ 毕 业 设 计（论 文） 外 文 参 考 资 料 及 译 文 译文题目： 基于单片机的 油浸式 变压器温度监测系统 的设计 学生姓名： &n
2、bsp; 学 号： 专 业： 通信工程 所在学院：
3、; 指导教师： 职 称： &
4、nbsp; 2010 年 12 月 28 日 说明： 要求学生结合毕业设计（论文）课题参阅一篇以上的外文资料，并翻译至少一万印刷符（或译出 3 千汉字）以上的译文。译文原则上要求打印（如手写，一律用 400 字方格稿纸书写），连同学校提供的统一封面及英文原文装订，于毕业设计（论文）工作开始后 2 周内完成，作为成绩考核的一部分。 Desi
5、gn of Temperature Monitoring System for Oil-immersed Power Ransformers Based on MCU Suxiang Qian Hongsheng Hu Department of Mechanical and Electrical, University of Zhejiang Province, China E-mail: Abstract: C With the expansion of electric capacity and large-sc
6、ale extension of power grid, electric equipment is playing a significant role in modern life. At present, the technology of condition monitoring and fault diagnosing of power transformer has been made some improvement, yet its real-time performance and reliability still can't meet the requiremen
7、t of safe production. Due to different thermal effects led by the natural or factitious fault, its temperature of oil-immersed power transformers is easy to change abnormally. An on-line measuring and controlling system based on MCU is discussed in this paper. In order to satisfy the req
8、uirement of state monitoring and fault diagnosis of power transformer on real-time and reliability, a kind of intelligent on-line monitoring instrument is designed. Each of its part is explained in this paper, including temperature signal collecting and data processing system. The simulation result
9、showed the designed system was good in its real-time, reliability and running cost. Therefore, the designed state monitoring system for temperature and fault diagnosis of power transformer can be widely used in engineering and is expected to bring a bright future. Key words C Oil-immersed Power Transformer, Temperature, Data processing, MCU I. INTRODUCTION situation. There are several methods to measure the hotspot temperature. A simple method is that the With the continuous development
